Expert Answers about Trailer Tool Box
- A-Frame Trailer Tool Boxes
- We have many good choices in A-frame trailer type tool boxes you can see on the linked page. These include plastic, aluminum and steel models from well-known makers like DeeZee. You can click on the specific size you prefer.
For a lightweight plastic option we have DeeZee's 6-cubic-foot Specialty Series tool box # DZ91717P which measures 36 x 19-1/2 x 18-inches tall. Mounting hardware is included. Plastic boxes spare you worries about rust and they tend to make less noise too. This box...
view full answer... - Recommended Trailer Tongue Tool Boxes
- We offer trailer tool boxes in steel, aluminum and plastic and for a-frame or underbody installation. The linked page will let you see all boxes and the filters on the page allow you to narrow the results shown based on your preferred type, material, brand and color.
In an a-frame type a great cost-effective choice is the DeeZee # DZ91717P which is of sturdy black plastic construction and that features 6-cubic-feet of capacity. This box measures 36 x 19-1/2 x 17-3/4-inches. A similar aluminum...
view full answer... - Tonneau Cover that Fits 2020 Ford F-350 Short Bed with Tool Box
- We have the Access tonneau cover part # A61399 which is a confirmed fit for your 2020 Ford F-350 short bed which was designed to fit behind a tool box. For a tool box then a chest style would be the best option since it would sit below bed rail height which would prevent clearance issues with the trailer as it's being towed. For that we have the UWS part # UWS01013 which is a fit for your truck as well. With both of these installed your rear view camera would not be obstructed as well.
view full answer... - Is The Mount For Installing Trailer Tongue Tool Boxes On a V-Nose Trailer Available?
- You will need to have a custom mount fabricated for installing 2 of the DeeZee Specialty Series Trailer Tongue Tool Boxes # DZ91717P. As not all V-Nose trailers are going to have the same dimensions and the frames can also have different positions the mounts need to be custom fabricated. I have seen some use a steel plate mounted on top of the frame while others use angle iron welded to the frame to provide the support and mounting points for the boxes.
view full answer... - Availability of Truck Bed Toolbox that Mounts Around Wheel Well
- It sounds like you are talking about the DeeZee tool box like part # DZ94 that mounts on the inside of a bed rail around the wheel well.
We offer several style of toolboxes like this that you can view at the attached link. Feel free to check them all out to find the one you are interested in. You can email me back with the picture you have and I will find you the exact one also.
view full answer... - Is There a Replacement Lock Cylinder Available For the Compression Latch # 313-8-325-281?
- Currently we only carry the Replacement Compression Latch # 313-8-325-281 as an assembly for the RC Manufacturing Z-Series Truck or Trailer Underbody Tool Box # UB1818-36. We will not have just a replacement key cylinder for the latch.
view full answer... - Tool Box Options for a 2006 Dodge Ram Pickup Short Bed
- I do have some tool boxes that are confirmed to fit your 2006 Dodge Ram Pickup 2500 with a short bed, but I was unable to locate any information on the UVS tbsd69ablk tool box that you referenced.
If you are looking for a standard tool box that sits on top of the side rails of your Ram then you might be interested in the 12 cu ft DeeZee Red Label Truck Bed Toolbox # DZ8170D. This is made of aluminum so it will do great holding up against the elements and it also includes 2 locking handles...
view full answer... - A-Frame Trailer-Mount Tool Boxes
- We have several styles of trailer-mount tool box shown on the linked page. These include products from Dee Zee, MaxxTow and RC Manufacturing and consist of A-frame and underbody-mount types.
DeeZee's A-Frame Trailer Tongue Toolbox # DZ91717 has dimensions close to those you're looking for: 34" Long (back) x 20" long (front) x 19" wide x 22" tall.
view full answer... - Could Access Toolbox # 834532001859 Fit with Low Profile Tool Box
- If you check out the picture I attached you'll see how tight the part # 834532001859 installs to a tool box and it's relation to the bed rail height. You should be able to tell from that if your latches would be accessible. If the latches are below the bed rail height then most likely no.
view full answer... - Availability Of a Black Gull Wing Crossover Truck Tool Box
- Currently UWS only offers the Gull Wing # UWS00016 in a bright aluminum finish. The DeeZee Hardware Series Truck Bed Tool Box # DZ8370SB is currently our only black tool box which uses gull wing lids. It is a slightly wider box at 69-3/4" versus 64" on the UWS you found.
view full answer... - Recommended Tonneau Cover for 2015 GMC Sierra 1500 with 6-1/2 Foot Bed and Tool Box
- I may have a solution for you, but unfortunately there is not a tonneau cover that's going to work with a toolbox that small; the only option available to fit a tool box is the Access Toolbox Edition Soft, Roll-Up Tonneau Cover # A62329 which fits with 19"-21" wide tool boxes that extend over the sides of the truck bed. This particular cover would not be compatible with a 12" wide tool box.
With that said, if you wanted to go with a tonneau cover like the BAK Revolver X2 # BAK39121 and...
view full answer... - Availability of a Custom Trailer Tongue Box
- At this time we do not manufacture custom tongue boxes but we do have several styles and sizes available (see link) like the DeeZee A-Frame Tool Box at 7.24 cubic feet # DZ91717 in aluminum.
view full answer... - Is There a Silver Version of the DeeZee Red Label Low Profile, Deep, Crossover Style Truck Tool Box
- I may have a solution for you, but there is not a silver version of the DeeZee Red Label Truck Bed Tool Box - Low-Profile, Deep, Crossover Style - Alum - 11.7 Cu Ft - Black # DZ8170DLB ; DeeZee has told me that they no longer make this specific box in silver, but there's some options that are very similar.
I recommend looking at the DeeZee Red Label Truck Bed Tool Box - Low-Profile, Crossover Style - Alum - 8 Cu Ft - Silver # DZ8170L or the DeeZee Red Label Truck Bed Tool Box - Deep,...
view full answer... - Compatibility of TracRac Truck Ladder Racks and Crossover Toolboxes on 2015 GMC Sierra
- The TracRac TracONE truck ladder rack system can be used with a crossover tool box by using their Toolbox Mount Kit # TH41000. The kit works with the ladder-rack base and mounting clamps that are included with your TracONE rack and lets you mount your toolbox without having to drill into your truck's bed rails, just the tool box.
If you have the TracRac G2 Sliding Ladder Rack then instead you'll use kit # TH25200. These items are not specific to any particular tool box.
Links are provided...
view full answer... - Available Truck Tool Boxes for Pickup with 5th Wheel Hitch Installed
- The narrowest crossover tool boxes we offer for your 2017 Ram 3500 short bed are 20-inches wide (meaning 20-inches front-to-back when installed in the bed) so none of those will avoid the clearance issue in your Ram's bed. All such crossover-style boxes are shown on the linked page.
But we do offer underbody tool boxes like # DZ75 and the others shown on the other page.
view full answer... - Transfer Tank/Toolbox With Gravity Feed for 1999 Ford F250
- The # DZ92647 transfer tank/tool box combo would fit your F250 just fine. The bed at the front is 64-3/4 inches wide, and the tank/box is 46-3/4 inches wide. We also offer a gravity feed connector kit, part # DZ97960. Keep in mind, a transfer tank should only be connected to the fuel tank of a Diesel truck, it's not meant for gasoline powered vehicles.
view full answer... - UWS Bright Polished Aluminum Wheel Well Tool Box Like UWS01624
- Yes, UWS offers the bright-polished aluminum version of their Truck Bed Fender Well Toolbox with Drawers, Driver's Side 3.9 cu ft in Bright Aluminum, part # UWS01623. The matching passenger-side tool box is part # UWS01625.
view full answer... - Recommended Tool Box and Mounting Method for Installation on the Back of an RV
- You can use the linked page to see all tool chests that are generally suited to your application, but there are a few considerations for installing a tool chest on the back of an RV.
First, you will have to have a sturdy rear bumper for part of the chest to rest on since the exterior surface of the RV will not be strong enough to handle its weight. You will also have to confirm that you can find and mount the box to structural elements inside the RV's outer skin. This is something to review...
view full answer... - Recommendation for Ladder Rack for 2014 Ram 1500 with Ram Box Tool Box Feature
- All of the ladder racks we offer for your 2014 Ram 1500 with the Ram Box tool box feature can be seen on the link provided at right. All of these are the multi-bar type (either 2 or 3 bars).
It sounds like you may be looking for a headache rack, which is a single-piece item that mounts just behind your cab. The second link at right will show you all options for your 2014 Ram 1500.
Please note that some products are NOT compatible with the Ram Box, or with the 5-1/2-foot bed.
At this...
view full answer... - Is There a Tool Box That Will Fit a 2006 Dodge Ram Crew Cab Short Bed
- Take a look at the Dee Zee Toolbox, # DZ6170NB (silver) or DZ6170NB (black). These boxes are 69-3/4 inches long x 12 inches wide x 14-1/4 inches tall so they will fit in that 14 space between the wheel well and the front of the bed on your 2006 Dodge Ram Crew Cab, short bed. These boxes have a capacity of 5.75 cu ft.
view full answer...
Go To Results